 |
| The fabric is less orange than this, but doesn't photograph well |
I'm using up a remnant of brushed cotton, and making the longer-sleeved version, but with the contrasting collar tabs. I'm not convinced that same-coloured tabs would really work in a patterned fabric, although they do show up well on this plain dress in a very similar style, worn by Romola Garai in the TV series The Hour.
 |
| Straight skirt, but similar bodice detail |
The first job was, as ever, pattern alterations. I shortened the bodice below the bust as usual, and made a mock-up using two left fronts. It (mostly) worked in terms of the fit, but I was worried about how the shortening would affect the position of the three points on the right front. To check, I made a mock-up of the right front as a single piece, minus the seam allowances and with the seam lines machine sewed in contrast thread, and basted it onto the existing toile.
 |
| First toile |
Sure enough, the bottom point ended up a long way down the bodice. I do quite like it as a look, and may make this up in the future, but it's not what I'm after for this dress. It's not entirely apparent from the envelope illustration, but the bottom point should be just below the end of the vertical bust dart. It's clearer on the line drawing on the instruction sheet.
 |
| Bodice points relative to bust darts |
There was also a second issue. Years of being hunched over either a computer keyboard at work or my sewing at home have left me with atrocious posture - among other things, my shoulders curve forwards, giving me hollows around my collarbones. This can cause collars to lie oddly and, in this case, it created wrinkles around the neckline of dress where the fabric bunched around the base of my neck. It's apparent on Nancy, who is exactly my shape and posture (she is, after all, my 'twin self').
 |
| Spot the wrinkle! |
I decided that the solution (other than working on my posture, which I've started to do but is a longer-term job than this dress - I hope!) was to scoop out the neckline. This had the double advantage that it also changed the angle of the two contrast sections, and allowed me to move them up the bodice.
I redrew the left front with the new neckline curve, and made a new toile. Then I repeated the exercise of making a sepaprate right front, based on the dimensions of the original tabs and the curvier neckline.
 |
| Second toile - much better |
Once I was happy that this worked, I traced the three separate pieces off the completed drawing, and added the seam allowances, notches, and tailor tack markings.
 |
| Comparing the two versions |
Pattern created, it was time to cut out. I had measured the remnant and knew that it was long enough. Well, almost. Certainly within what I count as 'long enough'. Unfortunately, on closer inspection I found that the print was directional and the fabric has a very slight nap, and all the cutting layouts for the fabric width were 'without nap'.
 |
| Skirt, bodice and sleeve pieces are all placed both ways |
The print is tiny, and the nap is negligible, so I could probably have got away with it. However, I am fussy about things like this, and my stubborn streak refused to give in. I checked the skirt pieces against myself, and realised that I could get way with shortening them. I can always make a faced hem in a different fabric if I find that a narrow hem doesn't hang correctly. I laid the fabric out on the floor, and prepared to do battle.
Shortening the skirt pieces meant I could fit three of the six skirt parts side by side.
 |
| Challenge accepted |
By cutting everything else out from a single layer, I was able to get the whole dress cut out in the same direction, even the facings, and add a pocket bag, and leave enough for a belt.
 |
| Yes!!!! |
Result! Now to sew it all together.
No comments:
Post a Comment